Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injectors on a Ford Fiesta ST

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Fuel injectors

In today's tutorial, you will learn how to remove and replace the fuel injectors on a Ford Fiesta ST, following the instructions below. First, open the bonnet of your car and start by removing the engine cover. Next, take off the plastic cover from the rail and then unscrew the screws located at the base, disconnecting the fuel pipe. At this point, remove all the injectors, replacing the faulty one with a new one (using the original replacement part); then reassemble everything, applying the reverse procedure of disassembly!

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Injectors on the Ford Fiesta 1.4 TDCi?
How to Replace the Injectors on the Ford Fiesta 1.4 TDCi?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the injectors on the Ford Fiesta, open the bonnet and detach the plastic cover from the top of the engine. This will allow access to the u…
How to Replace the Injectors on a Ford Fiesta 1.6 TDCi
How to Replace the Injectors on a Ford Fiesta 1.6 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the injectors on a Ford Fiesta 1.6 TDCi, open the bonnet to access the components at the top of the engine block after removing the plasti…
How to Replace Injectors in a Ford Fiesta?
How to Replace Injectors in a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial, see how to replace the injectors in a Ford Fiesta, a very simple operation. Before proceeding, wait for the engine to be completely…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What is the tightening torque of the Ford Fiesta 1.4 TDCi injectors? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos