Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the transmission oil of the Ford Explorer Mk5

Model: Ford Explorer MK 5, U502 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Transmission fluid

See other generations:
Video tutorial

This guide shows how to replace the transmission oil of the Ford Explorer Mk5. The first step is to unscrew the filler cap of the transmission oil reservoir located under the engine air filter box. From underneath the vehicle, locate the transmission drain bolt, unscrew it, and let the lubricant drain into a disposal container.

Re-screw the bolt and clean any oil residue.

Pour the new lubricant through the unscrewed cap into the engine compartment. Before using the vehicle, engage all gears to circulate the oil completely.

After a few minutes of driving, check for leaks from the drain bolt and tighten as necessary.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Fuse Diagram for a Ford Explorer MK5
Ford Explorer (2011-2019 / MK 5, U502) Today, thanks to this useful tutorial, you can see all the fuse diagrams present in your Ford Explorer, a specific model of the fifth generation prod…
How to Reset the Engine Oil Life Indicator on the Ford Explorer Mk5
How to Reset the Engine Oil Life Indicator on the Ford Explorer Mk5
Ford Explorer (2011-2019 / MK 5, U502) This guide shows how to reset the engine oil change indicator on the Ford Explorer Mk5. To perform this operation, enter the vehicle with the key and…
Localization of the fuse boxes in the Ford Explorer MK5
Localization of the fuse boxes in the Ford Explorer MK5
Ford Explorer (2011-2019 / MK 5, U502) In this video, we can see where the fuse boxes of the Ford Explorer MK5 are located. The first one is located in the lower part of the dashboard, on …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos