Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Remote for the Ford F-150 Pickup?

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Key

In this tutorial, we will see how to program a new remote for the Ford F-150 pickup, a very simple and quick operation. To do this, you will need two already functioning keys; otherwise, you cannot proceed. First, sit inside the cabin, then insert the first working key, turn on the ignition, wait 3 seconds, and turn off the ignition. At this point, insert the second working key within 10 seconds, repeat the operation for it, and finally for the new remote. If the procedure was executed correctly, the doors will lock and unlock automatically.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Program a New Remote for the Ford F-150 Pickup?
How to Program a New Remote for the Ford F-150 Pickup?
Ford F-150 (2004-2008 / MK 11) .. In this tutorial, you will see how to program a new remote for the Ford F-150 pickup, a very simple operation. Start by entering the.. …
How to program a remote control in a Ford F-150 pickup truck?
How to program a remote control in a Ford F-150 pickup truck?
Ford F-150 (1997-2004 / MK 10) In this tutorial we can see how to program a remote control in the Ford F-150 pick-up truck, an extremely simple and fast operation, to be carried ou…
How to Program a New Remote for the Ford F-150 Pickup?
How to Program a New Remote for the Ford F-150 Pickup?
Ford F-150 (2015-2020 / MK 13) .. In this tutorial, you will learn how to program a new remote for the Ford F-150 pickup, a very simple and quick process. To do this, you.. …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos