Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Alternator from a Ford Focus 1.6 TDCi

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Alternator

See other generations:
Video tutorial

Here are the instructions to remove and replace the alternator on a Ford Focus 1.6 TDCi. First, open the bonnet of your car and remove the plastic engine cover. Then disconnect the various wiring found above the alternator to gain access, as shown in the video.

At this point, unscrew the alternator mounting bolts and disconnect the electrical wiring to remove it from the engine bay. Replace and install the new original alternator, reassembling and replacing the belt with a new one.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

Removing the Alternator from a Ford Focus 1.6 TdCi
Removing the Alternator from a Ford Focus 1.6 TdCi
Ford Focus (2004-2011 / MK 2, Focus 2) .. In this video tutorial, you will learn how to remove the alternator from a Ford Focus 1.6 TdCi second series, which is also applicable to the.. …
How to Replace the Alternator Belt on the Ford Focus 3 1.6 TDCI
How to Replace the Alternator Belt on the Ford Focus 3 1.6 TDCI
Ford Focus (2011-2018 / MK 3) In this guide, discover how to remove and replace the auxiliary or alternator belt on the third-generation Ford Focus with a 1.6 TDCI engine. First, …
Difficulty accessing the alternator of the Ford Focus.
Difficulty accessing the alternator of the Ford Focus.
Ford Focus (2011-2018 / MK 3) In this video, the youtuber shows us his disappointment at the evident difficulty in reaching and disassembling - and then introducing and reassembli…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos