Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Alternator from a Ford Focus 1.6 TdCi

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Alternator

In this video tutorial, you will learn how to remove the alternator from a Ford Focus 1.6 TdCi second series, which is also applicable to the Ford C-Max. In this case, the engine is already disassembled, so only a few steps are needed to remove it: the alternator is attached via a shaft to the pulley, so by undoing the bolts of the shaft with a ratchet spanner, you will be able to extract it. At this point, undo the bolts of the alternator as shown in the video. Remove the alternator by pulling it outwards. For reassembly, follow the same procedure in reverse.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Alternator from a Ford Focus 1.6 TDCi
How to Remove the Alternator from a Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) Here are the instructions to remove and replace the alternator on a Ford Focus 1.6 TDCi. First, open the bonnet of your car and remove the plastic en…
How to Replace the Alternator Belt on the Ford Focus 3 1.6 TDCI
How to Replace the Alternator Belt on the Ford Focus 3 1.6 TDCI
Ford Focus (2011-2018 / MK 3) In this guide, discover how to remove and replace the auxiliary or alternator belt on the third-generation Ford Focus with a 1.6 TDCI engine. First, …
How to replace the alternator of a Ford Focus 1.6 TDCi MK2
How to replace the alternator of a Ford Focus 1.6 TDCi MK2
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, we will see how to replace the alternator of a Ford Focus 1.6 TDCI MK2: first, we remove the battery, disconnecting the negative conne…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos