Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Front Seat

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Seat

See other generations:
Video tutorial

If you want to thoroughly clean the upholstery, it is essential to remove the seats. This allows you to treat the seat cover and carpet properly and ensures perfect drying.

Slide the seat all the way back to access the front mounting pins and remove them. Similarly, slide the seat all the way forward and remove the rear pins.

Then, lift the seat to access the airbag connector and disconnect the battery before unplugging the connector to avoid triggering the warning light.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Front Passenger Seat
Instructions for Removing the Front Passenger Seat
Ford Focus (1998-2004 / MK 1) To remove the front passenger seat, first slide it all the way back, remove the plastic cover on the right rail that covers the mounting bolt, then u…
Removing the Front Seat on a Ford Focus
Removing the Front Seat on a Ford Focus
Ford Focus (1998-2004 / MK 1) In this video tutorial, you will learn how to remove the front seats from a Ford Focus. The procedure for removing the front seat is quite similar ac…
Instructions for Removing the Rear Seat
Instructions for Removing the Rear Seat
Ford Focus (1998-2004 / MK 1) Removing the rear seat is very simple. Start with the seat base: it is secured at the front with bolted brackets and has clips at the rear. First, un…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos