Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Fuel Tank of the Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014

This guide outlines the main instructions for removing and replacing the fuel tank of the Ford Mondeo in simple and quick steps. First, raise the vehicle and begin by removing the metal shield found under the tank by unscrewing all the fixing screws; then disconnect all the fuel lines from the tank, also unplugging the electrical connector, as shown in the video. At this point, unscrew the bracket screws to lower the tank, then replace it with the new one!

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Ford Mondeo
How to Replace the Fuel Pump on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) How to replace the fuel pump on a Ford Mondeo? Let's see how to dismantle the tank and the pump inside it. First, lift the car, then remove the fuel …
Guide to replacing the timing belt of the Ford Mondeo 2.0 TDCI
Guide to replacing the timing belt of the Ford Mondeo 2.0 TDCI
Ford Mondeo / Fusion (2007-2014 / MK 3) Today's instructions will show us the process of disassembling and replacing the timing belt of the Ford Mondeo 2.0 TDCI. First, we open the hood of …
How to Replace the Glow Plugs on a Ford Mondeo 2.0 TDCi
How to Replace the Glow Plugs on a Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2014-2021 / MK 4) Here’s the guide on how to remove and replace the glow plugs on the Ford Mondeo 2.0 TDCi engine. In this video, you will see how to carry out the rep…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos