Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Door Panel of the Ford Explorer

Model: Ford Explorer MK 2, Un105, Un150 - Years 1995-2001
Part: Door trim panel

In today's video tutorial, we will see the steps on how to remove and replace the front door panel of the Ford Explorer, following the instructions below. First, open the front door of your car and start removing the plastic cover of the handle, along with all the other covers located on the door panel; also remove the window switch panel, disconnecting the electrical connector found underneath, as shown in the video. At this point, unclip the sides of the front door panel until you completely remove it!

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Explorer (2011-2019 / MK 5, U502) In this guide, follow the instructions to remove and replace the external door handle on the front door of a Ford Explorer. First, open the front doo…
Ford Explorer (2006-2010 / U251, MK 4) Today, in this brief and simple guide, you will see the steps to remove and replace the external rear-view mirror on a Ford Explorer. First, open the…
Ford Explorer (2011-2019 / MK 5, U502) The step-by-step instructions in this guide will allow you to remove and replace the external wing mirror on the Ford Explorer. First, open the front…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos