Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Wheel Bearing

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Bearing

See other generations:
Video tutorial

The video guide walks you step by step through the replacement of the wheel bearing. To determine when replacement is necessary, simply check, with the car on a jack, for play in the wheel itself; additionally, during driving, you may notice increased noise.

Once the vehicle is secured on axle stands, the first step is to remove the wheel. Next, disassemble the brake caliper and remove it along with the disc.

At this point, unscrew the central nut that holds the bearing to the hub, and you can then proceed with the replacement. The car in the video is a 2002 Ford Focus, but the procedure is similar for all vehicles.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wheel Bearing on a Ford Focus
How to Replace the Front Wheel Bearing on a Ford Focus
Ford Focus (2011-2018 / MK 3) To replace the front wheel bearing on a Ford Focus, lift the car with a jack so that the wheel corresponding to the bearing to be replaced is not in …
Replacement of Front Wheel Hub Bearing
Ford Focus (2004-2011 / MK 2, Focus 2) Replacing the front wheel hub bearing is quite straightforward, but it is advisable to have a press to extract the old one and insert the new one; th…
Replacing the Front Wheel Bearing
Replacing the Front Wheel Bearing
Ford Focus (1998-2004 / MK 1) If the wheel has significant lateral play and unusual noise, the problem lies with the bearings, so obtain the replacement parts and proceed with the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos