Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel Bearing on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Bearing

See other generations:
Video tutorial

To replace the front wheel bearing on a Ford Focus, lift the car with a jack so that the wheel corresponding to the bearing to be replaced is not in contact with the ground. At this point, loosen all the bolts securing the hub to the respective suspension, allowing it to be removed from its housing: this will enable you to extract the bearing located at the centre of its housing for replacement with a new one. After the replacement, remount the hub and the corresponding wheel.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to change the battery of the key fob remote for a Ford Focus
How to change the battery of the key fob remote for a Ford Focus
Ford Focus (2018-2025 / MK 4) In the tutorial in question, we see how to replace the battery of the key remote for a Ford Focus car. First, take the key remote in hand and press t…
Where to Position the Jack on the Ford Focus?
Where to Position the Jack on the Ford Focus?
Ford Focus (2011-2018 / MK 3) In this video, see where to position the jack on the Ford Focus, essential if you need to lift the vehicle, for example, to replace a flat tyre. As s…
How to Change the Key Fob Battery of a Ford Focus
How to Change the Key Fob Battery of a Ford Focus
Ford Focus (2011-2018 / MK 3) How to change the key fob battery of a Ford Focus? Follow this detailed guide. Take your key fob and insert a screwdriver between the two ends of the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos