Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Position the Jack on the Ford Focus?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, see where to position the jack on the Ford Focus, essential if you need to lift the vehicle, for example, to replace a flat tyre. As shown, the jacking points are indicated by an arrow on the lower plastic cover and there are two on each side.

For the front, the point is at the lower arm bush, while for the rear, you can use either the frame area in front of the wheel or the centre of the axle. Ensure you follow all necessary safety measures before going underneath the vehicle.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Fit Roof Bars on a Ford Focus
How to Fit Roof Bars on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To fit the roof bars on a Ford Focus, first assemble the bars: insert the bar into the bracket, which should be properly placed into its base. Then, …
How to replace the antenna on the Ford Focus?
How to replace the antenna on the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, you will see how to replace the antenna on the Ford Focus, a very simple and quick operation. First, ensure that the key is not ins…
How to replace the gear shift knob of the Ford Focus 2008
How to replace the gear shift knob of the Ford Focus 2008
Ford Focus (2004-2011 / MK 2, Focus 2) In order to successfully replace one of the front windshield wipers of your Ford Focus (2008), all you need to do is pay attention to the steps descr…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos