Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Ford Focus MK2 rear wheel bearing replacement

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Bearing
Operation: Ford Focus MK2 rear wheel bearing replacement

Replacing the rear wheel hub bearing on the Ford Focus Mk2 is a maintenance that can be carried out do-it-yourself since it is possible to buy the complete hub and do not have to resort to a press: it will therefore be necessary to remove the fixing pins of the hub flange and replace it completely; then loosen the wheel fixing pins before lifting the vehicle, complete the disassembly of the wheel, unhook the hand brake cable, disassemble the brake caliper complete with support, remove the brake disc to reach the fixing pins of the flange of the hub which can then be removed and replaced with the new one.


Posted on 19 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2018-2025 - What is the Ford Focus front wheel bearing price? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos