Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate Panel in a Ford Everest?

Model: Ford Ford Various
Part: Door trim panel

As you can see in this tutorial, removing the tailgate panel in a Ford Everest is an extremely simple and quick operation. Start by opening the boot area, then remove both the pillar covers and the lower edge by pulling them towards you. Once done, unclip the handle cover using a flat-head screwdriver, or preferably a plastic spatula to avoid leaving any marks, and unscrew the two screws inside. At this point, you can grasp the panel from the rear edge and unclip it from the tailgate.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of the Ford Everest
How to Remove the Front Door Panel of the Ford Everest
Ford Ford Various The instructions below show how to remove and replace the front door panel of the Ford Everest. First, open the front door and start by removing the …
How to remove the AdBlue warning light on a Ford Everest?
How to remove the AdBlue warning light on a Ford Everest?
Ford Ford Various If the AdBlue warning light has illuminated on your Ford Everest's instrument cluster, it means that the fluid in the emissions system has reached th…
How to Replace the Remote Battery in a Ford Everest?
How to Replace the Remote Battery in a Ford Everest?
Ford Ford Various Replacing the remote battery in a Ford Everest is an extremely simple and quick operation, let’s see how to proceed in this tutorial. For this, you w…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos