Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wing on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Checks and maintenance

To replace the front wing on a Ford Fiesta, open the bonnet to access the screws that secure the corresponding headlamp from its upper side. Once the headlamp is removed, you can take it out from its housing and unscrew the additional screws securing the wing underneath. At this point, unscrew the screws located inside the corresponding wheel arch and those found at the top of the wing, near the mirror. After all the screws have been loosened, you can detach the wing and replace it with a new one.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on a Ford Fiesta?
How to Remove the Front Bumper on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial, see how to remove the front bumper on a Ford Fiesta, a very simple and quick operation. First, unscrew the bolts located inside the…
How to Remove the Front Seat of a Ford Fiesta
How to Remove the Front Seat of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you start, open the front door of your Ford Fiesta. Begin by sliding the front seat fully back on its tracks. Next, unscrew the front bolts th…
How to Replace the Timing Belt on a Ford Fiesta 1.4 TDCi?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the timing belt on a Ford Fiesta 1.4 TDCi, you need to access the left side of the engine bay. Here, you will find the pulleys that need t…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos