Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Remote for the Ford Explorer?

Model: Ford Explorer U251, MK 4 - Years 2006-2010
Part: Key

In this tutorial, we will see how to program a new remote for the Ford Explorer, a very simple and quick operation. To do this, you will need a working key; otherwise, you will have to visit an official dealership. First, position yourself inside the cabin, then ensure all locks are unlocked, insert the working key, turn on the ignition, and turn it off quickly. Repeat this step 8 times consecutively, leaving the key in the second position at the end. At this point, press any button on the remote to be programmed, turn off the ignition, and check that the operation was successful.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Remote for a Ford Explorer?
How to Open the Remote for a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this tutorial, you will see how to open the remote for a Ford Explorer, a very simple and quick operation, for example, to replace the battery. To…
How to Replace the Remote Battery in a Ford Explorer?
How to Replace the Remote Battery in a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this tutorial, you will see how to replace the remote battery in the Ford Explorer. For this simple and quick operation, you will need a replaceme…
How to Replace the Remote Battery in a Ford Explorer?
How to Replace the Remote Battery in a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this video, see how to replace the remote battery in a Ford Explorer, a very simple and quick operation. To proceed, you need a replacement batter…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos