Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Transit Mk6

Model: Ford Transit MK 6 - Years 2000-2006
Part: Service warning light

If the service light on the instrument panel of your Ford Transit Mk6 (2000-2006) continues to illuminate despite having completed the regular service, you must manually reset the light. First, enter the cabin and turn on the ignition while simultaneously pressing the brake and accelerator pedals fully for about 15 seconds. Once the service light turns off on the display, release both pedals, and the reset procedure is successfully completed. You can now turn off the ignition or start driving.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the 2019 Ford Transit
How to Reset the Service Light on the 2019 Ford Transit
Ford Transit (2014-2024 / MK 8) In this article, you will learn how to reset the service light on the 2019 Ford Transit. To reset the light, first turn on the instrument cluster wit…
How to Reset the Service Light on a Ford Transit
How to Reset the Service Light on a Ford Transit
Ford Transit (2014-2024 / MK 8) To correctly complete the manual reset of the service light on your new Ford Transit, simply follow the few steps described below. First, ensure that…
How to restore the service of the Ford Transit Connect
How to restore the service of the Ford Transit Connect
Ford Transit (2014-2024 / MK 8) In today's article, we are going to see how to reset the service light on the Ford Transit Connect. We recommend performing the procedure only after …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos