Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Tint the Rear Lights on a Ford Fiesta Mk8

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light

See other generations:
Video tutorial

Tinting car lights may not be a good idea, but if the result is aesthetically pleasing and does not inhibit the original light output, it can be considered, especially since it is an easy and inexpensive task within everyone's reach. The film can be easily found on Amazon, and the grey matte version costs £9.99 for a sheet measuring 30.5x122 cm. Free shipping.

The application requires a bit of skill. First, thoroughly degrease the light with a silicone remover, then apply the film and smooth it out to avoid air bubbles, and finally trim it to fit the shape of the light.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to replace the rear fog lights on the Ford Fiesta?
How to replace the rear fog lights on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) This video shows how to replace the rear fog lights on the Ford Fiesta. For this simple task, you will need a flat-head screwdriver, a Torx T20 key, …
Removing the Rear Light on a 2008 Ford Fiesta
Removing the Rear Light on a 2008 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In today's tutorial, you will learn how to remove the rear light to replace the bulbs on a 2008 Ford Fiesta. First, open the boot lid and unscrew the…
How to Reset the BMS on Ford Fiesta ST MK8
How to Reset the BMS on Ford Fiesta ST MK8
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In today's video, you will learn how to reset the BMS warning light, which is the battery monitoring sensor, on a Ford Fiesta ST MK8. Before starting…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos