Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace the rear fog lights in the Ford Fiesta?

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Fog lights
Operation: How to replace the rear fog lights in the Ford Fiesta?

In this video we can see how to replace the rear fog lights of the Ford Fiesta. For this simple operation we need a flat tip screwdriver, a Torx T20 wrench and a tool for removing the inserts. First we remove the wheel of the side in which we are going to work, then we disassemble the fender by removing all the plastic clips. At this point, extract the bulb holder from the lighthouse and disassemble the latter by unscrewing the two Torx screws on the sides. Finally, we assemble the spare part and reassemble everything by simply following the reverse procedure.


Posted on 4 April 2024 by ScegliAuto



Where are the controls for the fog lights in the Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In this tutorial we can see where the Ford Fiesta fog lamp controls are and how to activate them. As shown, the switch is located on the driver's sid
Where are the rear fog lights located in the Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In this video, we can see where the rear fog lights are located in the Ford Fiesta and how to proceed in case we need to replace them, which is a ver
How to replace the fog lights in the 2011 Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In this video we can see how it is possible to remove the fog lights of the Ford Fiesta, in case the latter is broken. First we go to prepare all the

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos