Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Solve the Water Problem in the Panels of a Ford Fiesta MK5

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Body

If water has entered the door of your Ford Fiesta through the gaps in the door seal, this video will help you resolve the issue. Usually, water enters but drains out through holes located under the door, which may have become blocked due to dust and dirt. You need to ensure that the water can drain again. Locate these holes under the door and clear them to allow the water to flow out; otherwise, you will soon start to smell the unpleasant odour of mould forming due to the wet upholstery. Use a small screwdriver to remove the dirt and let the water drain. Remember that the water must also drain with the door closed.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Water Temperature on a Ford Fiesta
How to Check the Water Temperature on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In some circumstances, you may need to check the water temperature of the vehicle, but how do you do it? Today, we will explain how to check the wate…
Where is the fuse box located in the Ford Fiesta 5?
Where is the fuse box located in the Ford Fiesta 5?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To easily locate the fuse box in your Ford Fiesta Mk5 (2002-2008), follow the steps outlined in this guide. First, go to the passenger side and open …
How to Solve the Overheating Problem on the Ford Fiesta
How to Solve the Overheating Problem on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Overheating in a Ford Fiesta MK6 can have several causes: the first check is the cooling circuit. With the engine running, check that the coolant cir…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos