Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Bonnet on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Body

In this guide, we will go through the steps to open a stuck bonnet on the Ford Fiesta, following the instructions below. The cause of a stuck bonnet is often a broken cable; in this case, it is necessary to use a penetrating fluid on the gap of the bonnet, possibly using wedges to slightly open the bonnet. Then, use a thin flat screwdriver to try to manually open the bonnet from the gap, releasing the latch; once opened, proceed with replacing the cable!

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the locked hood of the Ford Fiesta MK7
How to open the locked hood of the Ford Fiesta MK7
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video, we can see how to open the locked hood of a Ford Fiesta (but the system also applies to the Fusion and Focus), where the opening cable…
How to Open a Stuck Front Bonnet on the Ford Fiesta
How to Open a Stuck Front Bonnet on the Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) If the front bonnet does not open despite pulling the release lever from inside the cabin, try to open the lock directly by acting on the mechanism i…
How to open the trunk of the Ford Fiesta
How to open the trunk of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Opening the trunk of the 2018 Ford Fiesta from the outside is a simple and quick operation. To open the trunk, we must keep the central locking of th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos