|
Do it yourself
| |||
| ||||
How to Replace the Interior Light on a Ford Kuga
Model: Ford Kuga
MK 2, C520
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
Let's see how to add a bright LED to the central interior light of the Ford Kuga: use a plastic spatula to pry around the edge of the light to remove the base and access the bulb. Once the edge is raised enough, try inserting your fingers inside to pull down the cover. Disconnect the electrical connectors, then unscrew the frame of the light without completely detaching it. Naturally, to identify the positive and negative wires, you will need a multimeter, which can be obtained from £10. Pass the wire with the LED transformer through the frame, then screw it back into place. Route the LED around the interior light, screw in the screws, and replace the light. As for the LED strip, you can find various options at all prices on any e-commerce platform by simply searching for "LED strip".
Updated on 15 August 2026 by ScegliAuto
Related tutorials
Ford Kuga
(2012-2019 /
MK 2, C520)
This guide shows how to remove the side indicator bulb on a Ford Kuga model mk2. The operation involves just two steps and requires one tool: a hard …
Ford Kuga
(2012-2019 /
MK 2, C520)
To replace the air filter on a Ford Kuga, open the bonnet to locate the components inside the engine bay: on the right side, you will find the filter…
Ford Kuga
(2012-2019 /
MK 2, C520)
Let's see how to install ambient lights on the handles of the Ford Kuga. First, remove the handle from the inside by unscrewing the fixing screw and …
Other guides you may be interested in
|
How to open the boot if it is stuck on a Mercedes B-Class?
On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
