|
Do it yourself
| |||
| ||||
How to Replace the Coolant of the Ford Fiesta
Model: Ford Fiesta
Fiesta 5, MK 5, MK V
- Years 2002-2008
Replace the coolant of the Ford Fiesta by unscrewing the clip that holds the air filter tube and removing the entire filter box. Now, go under the car and disconnect the coolant hose at the bottom of the radiator, start the engine for 10-15 seconds and then turn it off; unscrew the cap of the reservoir to let it drain completely, unscrew the clip and detach the rear hose of the reservoir, restart the engine for a few seconds and then turn it off again, reconnect it and remove the top cap of the radiator to let out the last remnants of the old coolant; once all the coolant has drained, reconnect the lower hose to the radiator, with the top cap of the radiator removed, pour the new liquid into the reservoir, when the liquid comes out of the top cap of the radiator, replace the cap, fill the liquid to the max level, press the radiator hoses, put the cap back on the reservoir, remove the tab holding the temperature sensor, disconnect the connector, remove it, open the reservoir cap and let out a bit of liquid, reposition it, secure the tab and reconnect the plug; finally, start the engine and keep it running until the fan comes on; at this point, you can reassemble the air filter box and the coolant is replaced.
Updated on 15 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Ford Fiesta
(2002-2008 /
Fiesta 5, MK 5, MK V)
Learn how to top up the coolant reservoir on a Ford Fiesta yourself to save on labour costs. Pull the plastic lever located at the bottom left of the…
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
How to dismantle the coolant expansion tank? Let's see how to dismantle the tank in the engine compartment of a Ford Fiesta. Lift the front bonnet to…
Ford Fiesta
(2002-2008 /
Fiesta 5, MK 5, MK V)
In this tutorial, you will learn how to replace the coolant in a Ford Fiesta by following the instructions below. First, open the bonnet of your car …
Other guides you may be interested in
|
How to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.194
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |