Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up Coolant in a Ford Fiesta?

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Antifreeze coolant

See other generations:
Video tutorial

In this tutorial, you will learn how to top up the coolant in a Ford Fiesta 5. Before carrying out this simple operation, ensure that the engine is sufficiently cool, as any spillage of boiling liquid can be very dangerous to your health. To proceed with the top-up, open the bonnet using the designated lever and unscrew the large yellow cap of the expansion tank, located on your left.

Once done, position a funnel and pour in the necessary liquid to reach a level close to the maximum, without exceeding it. Finally, remove the funnel and securely tighten the cap.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Top Up the Windscreen Washer Fluid on a Ford Fiesta
How to Top Up the Windscreen Washer Fluid on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Follow these steps to top up the windscreen washer fluid on a Ford Fiesta: Pull the plastic lever located at the bottom right of the steering wheel, …
How to Check and Top Up Engine Oil on Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this simple video, you will see how to check the engine oil level and how to add it if necessary on a Ford Fiesta MK6. First, open the bonnet of y…
How to Top Up the Antifreeze in a Ford Fiesta
How to Top Up the Antifreeze in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To top up the antifreeze in a Ford Fiesta, first open the bonnet. The coolant reservoir is located on the left side of the engine bay (when facing th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos