Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Central Display of the Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012

The following steps will allow you to dismantle and replace the central display of the Ford Kuga. First, get into the vehicle and start by removing the plastic cover above the display, prying it off from the sides; then unscrew the two fixing screws located on the side, disconnecting the electrical connector to remove it, as shown in the video. Next, unscrew the screws of the instrument panel cover to fit the new multimedia system, following the video tutorial until the end for reassembly!

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2008-2012 / C394, MK 1) In this video, you will learn how to remove the radio with display from a Ford Kuga. First, get inside the car and obtain some plastic levers to uncl…
Ford Kuga (2012-2019 / C520, MK 2) In this tutorial, you will learn how to remove the central display or onboard computer on a Ford Kuga, as well as on other models from the manufactur…
Ford Kuga (2012-2019 / C520, MK 2) To completely eliminate the Service light from the Ford Kuga dashboard, turn on the ignition and wait for all messages indicating resets to appear on…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos