Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on a Ford Transit?

Model: Ford Transit MK 8 - Years 2014-2024
Part: Timing belt

To replace the timing belt on a Ford Transit, open the bonnet to access the components in the engine bay. You will also need to remove the right front wheel, along with the wheel arch liner and the protection panel located on the left side of the engine block. Underneath, you will find the belt, which can be removed from the pulleys by loosening the central nut of the tensioner pulley; this will reduce the tension on the belt, allowing it to be slid out of its position. Replace it with a new one and reassemble all previously removed components.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2014-2024 / MK 8) Today's information will show you how and when to remove the timing belt on a Ford Transit, following the instructions below; on this type of engine,…
Ford Transit (2006-2014 / MK 7) We need to replace the timing belt of our Ford Transit Custom, as we have reached the mileage recommended by the manufacturer. Let's take a look at t…
Ford Transit (2006-2014 / MK 7) Below we will discover the useful information for disassembling and replacing the timing chain on the Ford Transit 2.2 TDCi. To access the timing cha…

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2014-2024 - How many km do you change the Ford Transit timing chain? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos