Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box Diagram of a Ford F-150

Model: Ford F-150 MK 9 - Years 1992-1997
Part: Fuse box

This helpful video tutorial shows all the diagrams for the two fuse boxes in a Ford F-150, produced from 1992 to 1997. These diagrams accurately display the name, location, and operating amperage of each fuse and relay. Additionally, the locations of the two fuse boxes are shown. The first box is located at the bottom of the dashboard to the left of the steering wheel, behind a plastic panel that needs to be removed. The second box is located in the engine compartment near the air filter on the right.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Position and diagram of the fuse box of the Ford F150 1997
Position and diagram of the fuse box of the Ford F150 1997
Ford F-150 (1997-2004 / MK 10) In this video, we will see the location and diagram of the fuse boxes for the 1997 Ford F150. Regarding the positioning inside the cabin, there is a …
Location of the Fuse Box in the Ford F150
Location of the Fuse Box in the Ford F150
Ford F-150 (2009-2014 / MK 12) When troubleshooting the electrical system of the Ford F150, you need to know the location of the fuse boxes to perform necessary checks and replace …
Where is the OBD2 port located on the Ford F 150?
Where is the OBD2 port located on the Ford F 150?
Ford F-150 (2015-2020 / MK 13) To be able to find the OBD2 port inside the cabin of your Ford F 150, you do not need to remove any components. In the following guide, we will help …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos