Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Key

Replacing the remote battery of the Ford Fiesta, as shown in this tutorial, is an extremely simple and cost-effective operation. You will need a small flathead screwdriver and a replacement CR2032 battery. First, press and hold the two buttons located at the bottom of the remote, then unlock the rear cover and open it. Next, remove the emergency key, lever along the indicated slot with the screwdriver, and separate the two halves. At this point, simply remove the old battery, insert the replacement, and reassemble everything.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Ford Fiesta?
How to Replace the Remote Battery of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the battery of the Ford Fiesta, use a tool to pry off the cover on the back of the remote, allowing you to remove the emergency key inside…
How to replace the remote battery of the Ford Fiesta?
How to replace the remote battery of the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the battery of the remote for the Ford Fiesta, press the two side tabs to lift the front cover. Removing it will allow you to extract the …
How to Replace the Remote Battery in a Ford Fiesta
How to Replace the Remote Battery in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's video, we will see how to replace the dead battery in a Ford Fiesta remote. Start by removing the plastic cover on the back. Now extract t…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does the yellow wrench light on the Ford Fiesta mean? Read answer
    • Fiesta 2008-2017 - What does the wrench light on my Ford Fiesta mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos