Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Light

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

Removing the rear light is extremely simple and requires no tools, nor the removal of other elements such as bumpers or trims; open the boot and remove the plastic cap on the inner trim of the boot, directly opposite the light housing; through this opening, you can access the fixing rings of the rear light: there are two small plastic nuts; unscrew and remove these rings, then pull the light outwards to disengage the pressure pin; complete the removal by disconnecting the power connector.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Windscreen Washer Reservoir
Instructions for Removing the Windscreen Washer Reservoir
Ford Focus (2011-2018 / MK 3) To remove the windscreen washer reservoir, first remove the front bumper to access the reservoir itself. Once the bumper is removed (refer to the rel…
Remove and Replace the Rear Light of the Ford Focus MK1
Remove and Replace the Rear Light of the Ford Focus MK1
Ford Focus (1998-2004 / MK 1) Today, you will see step-by-step instructions to remove and replace the rear light of the first series Ford Focus saloon. First, open the boot and st…
Guide to Removing the Fuel Pump from a Ford Focus
Ford Focus (1998-2004 / MK 1) Today's guide will illustrate the main steps for removing and replacing the fuel pump on a Ford Focus. First, open the rear doors and begin removing …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos