Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Windscreen Washer Reservoir

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield wipers

See other generations:
Video tutorial

To remove the windscreen washer reservoir, first remove the front bumper to access the reservoir itself. Once the bumper is removed (refer to the relevant instructional video), disconnect the pump and level sensor connectors, then detach the fluid supply pipes from the pump by unclipping the securing clips.

Proceed to remove the securing pins of the reservoir. During the disassembly, place a container to collect the washer fluid.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Removing and Cleaning the Windscreen Washer Reservoir on Ford Focus 2
Removing and Cleaning the Windscreen Washer Reservoir on Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) In today's tutorial, you will learn how to remove and clean the windscreen washer reservoir on a second-generation Ford Focus. First, lift the vehicl…
Removing the Windscreen Washer Pump from a Ford Focus
Removing the Windscreen Washer Pump from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today, in this tutorial video, you will see how to remove the windscreen washer pump from a Ford Focus. Start by removing the front right wheel and l…
How to Remove the Windscreen Washer Bottle on the Ford Focus?
How to Remove the Windscreen Washer Bottle on the Ford Focus?
Ford Focus (2011-2018 / MK 3) To remove the windscreen washer bottle on the Ford Focus, you must first remove the front bumper. This can be done by loosening the screws located at…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos