Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windscreen Washer Bottle on the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Windshield wipers

To remove the windscreen washer bottle on the Ford Focus, you must first remove the front bumper. This can be done by loosening the screws located at its lower, upper, and inside the wheel arch areas. Once the bumper is removed, the bottle will be visible; it is positioned directly in front of the wheel arch of the right front wheel. It can be removed by loosening its fastening screws, disconnecting the connectors, and detaching the hoses. Once the old bottle has been removed, it can be replaced with a new spare part.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Windscreen Washer Pump on a Ford Focus
Replacing the Windscreen Washer Pump on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Below are the steps that will allow you to disassemble and replace the windscreen washer pump on a Ford Focus. First, lift the vehicle to remove the …
Removing and Cleaning the Windscreen Washer Reservoir on Ford Focus 2
Removing and Cleaning the Windscreen Washer Reservoir on Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) In today's tutorial, you will learn how to remove and clean the windscreen washer reservoir on a second-generation Ford Focus. First, lift the vehicl…
How to Remove the Washer Fluid Reservoir and Pump on a Ford Focus
How to Remove the Washer Fluid Reservoir and Pump on a Ford Focus
Ford Focus (2011-2018 / MK 3) In this video, you will see the instructions on how to remove the washer fluid reservoir and pump on a Ford Focus Mk3. First, lift the vehicle from t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos