Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open and Close the Bonnet of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Body

See other generations:
Video tutorial

To open and close the front bonnet, observe a few small precautions to avoid unpleasant mishaps. First, stop the vehicle in a safe position, turn off the engine, and engage the handbrake.

At this point, locate the bonnet release lever, which is found low on the left side of the driver's side, just below the dashboard. Pull the lever to release the catch, then locate the second yellow lever under the bonnet, positioned centrally.

Pull it upwards to disengage the catch and lift the bonnet using the support rod. Finally, remove the support rod by placing it back in its holder, lower the bonnet to about 20 cm from the crossmember, and let it drop to close.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Follow the instructions in this guide to see the procedure for opening the bonnet of a Ford Fiesta in simple steps. First, open the front left door a…
How to open the front hood of the Ford Fiesta
How to open the front hood of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Opening the front hood of the Ford Fiesta is a simple and quick operation to be carried out independently. Before opening the hood, we must park the …
How to Open the Bonnet of the Ford Fiesta
How to Open the Bonnet of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The steps in this guide will show you how to open the bonnet of the Ford Fiesta, following the instructions below. First, open the driver's side fron…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos