Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Kuga
    4. : How to reset the service light on the Ford Kuga.

Ford Kuga - Video tutorial

Model: Ford Kuga MK 1, C394 - Years 2008-2012
Part: Checks and maintenance
Operation: How to reset the service light on the Ford Kuga.

To reset the service light for the Ford Kuga's car maintenance, we need to follow a few simple and quick steps. The first step is to turn on the instrument panel and the vehicle's onboard computer/radio. The second step is to press the accelerator pedal all the way down. The third step is to press the brake pedal six times. While keeping both pedals pressed, wait for the message "complete reset" to appear on the display. Once the message appears, release the pedals and turn off the radio and instrument panel.


Posted on 27 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the label "Normal mode" indicate on the Ford Kuga? Read Answer
    • Kuga 2020-2027 - What to do if the start & stop of the Ford Kuga is not working? Read Answer
    • Kuga 2008-2012 - Why does the message "fuel data error" appear on the Ford Kuga? Read Answer
    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read Answer
    • Kuga 2020-2027 - What are the main problems of the Ford Kuga? Read Answer
    • Kuga 2020-2027 - What to do if the Ford Kuga does not open? Read Answer
    • Kuga 2020-2027 - When should the Ford Kuga be serviced? Read Answer
    • Kuga 2020-2027 - What does the warning light indicating that tire pressure sensors are not detected on a Ford Kuga mean? Read Answer
    • Kuga 2008-2012 - Where does the Ford Kuga navigation SD card go? Read Answer
    • Kuga 2012-2019 - Why doesn't my Ford Kuga engine start anymore? Read Answer
    • Kuga 2020-2027 - What problems could the 2019 Ford Kuga present? Read Answer
    • Kuga 2012-2019 - How much is the Ford Kuga service? Read Answer
    • Kuga 2012-2019 - What to do if the Ford Kuga does not start? Read Answer
    • Kuga 2012-2019 - How to remove the engine failure warning light in the Ford Kuga? Read Answer
    • Kuga 2012-2019 - What caused the Ford Kuga central locking problem? Read Answer
    • Kuga 2012-2019 - How to reset the engine failure and service warning light on Ford Kuga? Read Answer
    • Kuga 2012-2019 - What warning lights are orange in the Ford Kuga? Read Answer
    • Kuga 2012-2019 - How many km do you need to service the Ford Kuga? Read Answer
    • Kuga 2020-2027 - How do you start the Ford Kuga? Read Answer
    • Kuga 2012-2019 - How much does it cost to change the timing belt on a Ford Kuga? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos