Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Timing Belt on the Ford 2.0

Model: Ford Ford Various
Part: Timing belt

With the help of this video tutorial, you will learn how to remove the timing belt from the Ford 2.0. First, open the bonnet and remove all the covering plastics, then loosen the tensioner pulley to slide off the worn belt. Next, unscrew the tensioning bolt of the chain tensioner and install the new chain along with all the previously removed parts, as shown in the video tutorial below. Test the correct operation of the new belt by starting the car; if the job has been done correctly, you can close the bonnet.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the timing belt on Ford vehicles.
How to replace the timing belt on Ford vehicles.
Ford Ford Various Today we will explain how to independently replace the timing belt on Ford Ecoboost vehicles. To replace the belt, we need to remove the pulley so we…
How to Replace the Timing Belt on a Ford 1.0 EcoBoost Engine?
How to Replace the Timing Belt on a Ford 1.0 EcoBoost Engine?
Ford Ford Various To replace the timing belt on a Ford 1.0 EcoBoost engine, loosen the screws securing the side protection panel of the engine, along with those securi…
How do you replace the timing belt of Ford with 1.0 EcoBoost engine?
How do you replace the timing belt of Ford with 1.0 EcoBoost engine?
Ford Ford Various In order to replace the timing belt of Ford vehicles with a 1.0 EcoBoost engine, you need to open the hood to access the components inside the engine…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos