Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo / Fusion
    4. : Car lock release

Ford Mondeo / Fusion - Video tutorial

Model: Ford Mondeo / Fusion MK 1 - Years 1993-2000
Part: Checks and maintenance
Operation: Car lock release

The basic method of unlocking your car without damage is to insert a shim in the space between the door and the pillar. It is a method that you can put into practice by yourself, without resorting to a mechanic. The base of the hand should be used to apply pressure, being careful not to damage the paint of your car. The wedged wedge should create a gap large enough for you to slide the rod into the cockpit. Once inside with the bar, the button must be pressed very decisively to be able to open the doors.


Posted on 13 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Mondeo 2014-2021 - What problems does the Ford Mondeo 2.0 TDCi with 150 hp present? Read Answer
    • Mondeo 2007-2014 - What problems could the Ford Mondeo TDCi 140 horsepower present? Read Answer
    • Mondeo 2014-2021 - What problems could the Ford Mondeo mk4 2.0 TDCi present? Read Answer
    • Mondeo 2014-2021 - What problems on Ford Mondeo 2.0 tdci? Read Answer
    • Mondeo 2007-2014 - Are there any problems on the Ford Mondeo 2.0 TDCi? Read Answer
    • Mondeo 2000-2007 - What is the location of the external temperature sensor in the Mondeo? Read Answer
    • Mondeo 2007-2014 - How to reset the immobilizer light in the Ford Mondeo? Read Answer
    • Mondeo 2007-2014 - What problems does the 140 bhp Ford Mondeo 2.0 TDCi have? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos