Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Cabin air filter

To prevent dust from entering the ventilation system of the Ford Fiesta, a dedicated filter is installed in the intake, which must be replaced periodically. To do this, sit in the front passenger seat and remove the panel at the end of the centre tunnel. Using the appropriate tool, remove the push pins that secure the panel under the glove compartment and take it off. Near the bulkhead, you will find the cover of the filter box, which you will remove after unscrewing the screw that holds it in place. Pull out the old filter and replace it with a new one, then reassemble everything in reverse order.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Ford Fiesta Mk6
How to Replace the Cabin Air Filter in a Ford Fiesta Mk6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide shows how to replace the cabin air filter in a Ford Fiesta Mk6. From the footwell of the front passenger seat, unscrew the plastic screw o…
Replacement of the cabin air filter of the Ford Fiesta
Replacement of the cabin air filter of the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To ensure a constantly clean airflow in the Ford Fiesta's cabin, we need to periodically replace the specific filter. To do this, position yourself i…
How to replace the cabin air filter of the 2017 Ford Fiesta
How to replace the cabin air filter of the 2017 Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) If you are planning to replace the cabin air filter in your 2017 Ford Fiesta on your own, then all you have to do is follow the following procedure. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos