Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Car Key Fob Battery

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Key

See other generations:
Video tutorial

In the following steps, you will learn how to change the batteries in your car remote. For some types of remotes, simply press the button to release the key, creating a small opening to lift the tab. Identify the part of the remote that needs to be removed and, using tweezers or a very thin flathead screwdriver, try to lower the tab; when you hear a slight click, apply a little pressure to remove the battery cover.

If there are no slots or openings on the remote, the operation will be a bit longer and more delicate. First, remove the key by pressing the side button, then take off the silver cap. Get a small flathead screwdriver and gently lift the cover.

Remove the flat battery using the same screwdriver, being careful not to damage the internal parts.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery for a Ford Focus
Replacing the Key Fob Battery for a Ford Focus
Ford Focus (2011-2018 / MK 3) Below are the steps to disassemble and replace the battery of the key fob for a Ford Focus. First, take your key fob and start by removing the rear c…
How to Replace the Key Fob Battery on Ford Focus
How to Replace the Key Fob Battery on Ford Focus
Ford Focus (2018-2025 / MK 4) Today, you will see step-by-step instructions on how to remove and replace the battery in the key fob for the Ford Focus. First, take your key fob an…
How to Replace the Key Fob Battery of a Ford Focus
How to Replace the Key Fob Battery of a Ford Focus
Ford Focus (2011-2018 / MK 3) How to replace the battery of a key fob for a Ford Focus? Follow these steps. Take your key fob and use a screwdriver to pry between the key cover an…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos