Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filler Cap on the Ford Focus?

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Fuel cap

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the fuel filler cap on the Ford Focus, a very simple and quick operation. First, lift the rear right side of the vehicle, taking all necessary safety precautions, then remove the wheel and, by taking out all the indicated plastic rivets, also remove the inner wheel arch.

Next, unscrew the two bolts that have just been exposed, proceed to unscrew the additional screws near the fuel cap, and detach the entire filler cap assembly. To fit the replacement, simply follow the reverse procedure.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

Removing the Fuel Tank on a Ford Focus
Removing the Fuel Tank on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This guide briefly outlines the steps to remove and replace the fuel tank on a Ford Focus. First, lift the vehicle and begin draining the fuel inside…
Replacing the fuel pump in the Ford Focus
Replacing the fuel pump in the Ford Focus
Ford Focus (1998-2004 / MK 1) Today, this guide will show you the main instructions to dismantle and replace the fuel pump in the Ford Focus. To access the fuel pump or the float,…
How to Replace the Fuel Pump on a Ford Focus
How to Replace the Fuel Pump on a Ford Focus
Ford Focus (2011-2018 / MK 3) Briefly, here are the instructions to remove and replace the fuel pump on a Ford Focus. First, open the rear doors of the vehicle and begin removing …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos