Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of the Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Door trim panel

In this guide, you will find the main instructions for removing the rear door panel of the Ford C-Max. First, open the rear door and start unscrewing the fastening screws located under the plastic cap of the opening handle and under the plastic cover of the grab handle; then, lever the sides of the panel to detach and remove it, disconnecting the handle cable and the electrical connector of the window switch, as shown in the video. Now, if necessary, remove the lock or the speaker, following the video tutorial to the end!

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of a Ford C-Max
How to Remove the Rear Door Panel of a Ford C-Max
Ford C Max (2003-2010 / MK 1) How do you remove the rear door panel on your stunning Ford C-Max? This video explains how to proceed. Before starting the disassembly work, disconne…
How to Remove the Door Panel on a Ford C Max
How to Remove the Door Panel on a Ford C Max
Ford C Max (2003-2010 / MK 1) How to remove the door panel on a Ford C Max? Here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the…
Disassembly of the front door panel of the Ford C-Max
Disassembly of the front door panel of the Ford C-Max
Ford C Max (2003-2010 / MK 1) Today we will discover the necessary instructions that will allow us to disassemble and replace the front door panel of the Ford C-Max. First, we ope…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos