Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulbs on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Headlight bulb

After lifting the bonnet, remove the three screws to free the headlamp, allowing you to remove it without performing difficult operations in tight spaces with your tools. Once extracted, disconnect the connector that supplies all necessary power to each bulb, located at the back of the headlamp. Now that you have removed the entire headlamp, you can take off the plastic protective cover behind the bulbs to extract them along with the bulb holder, replace the faulty bulbs, and then retrace your steps to reassemble the components.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fog Lights from a Ford Mondeo
How to Remove the Fog Lights from a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) Are your fog light bulbs not working? Follow these steps to remove a fog light from a Ford Mondeo. Lift the car on a column lift and remove the locki…
Removing Bumper of a Ford Mondeo
Removing Bumper of a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Need to remove the front bumper of the Ford Mondeo? Here's how to do it from the front of the car. Lift the bonnet and secure it. Remove the retainin…
How to reset the battery sensor of a Ford Mondeo
How to reset the battery sensor of a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) If the START&STOP system of your Ford Mondeo model mk4 does not work, it may be necessary to reset the battery sensor. To perform the reset, first pr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos