Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Kuga
  6. : How to replace the battery of the Ford Kuga 2 key

Ford Kuga - Video tutorial

Model: Ford Kuga MK 2, C520 - Years 2012-2019
Part: Key
Operation: How to replace the battery of the Ford Kuga 2 key

Thanks to the following mini guide, you will finally be able to correctly and safely complete the replacement of the button battery located inside the key of your Ford Kuga Mk2 (year 2012-2019). First of all, get a flat screwdriver and a new battery, then remove the key cover and locate the exhausted battery inside. At this point, remove the old battery and insert the new one. Then reassemble both the front and back covers that were previously removed correctly, and the procedure is finally successfully completed.


Posted on 12 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Kuga 2012-2019 - What to do if the Ford Kuga does not start because the system does not detect the key? Read Answer
    • Kuga 2012-2019 - Why does the Ford Kuga remote control not work after battery replacement? Read Answer
    • Kuga 2012-2019 - Why is my Ford Kuga key not detected? Read Answer
    • Kuga 2012-2019 - What to do when your Ford Kuga key is not detected? Read Answer
    • Kuga 2020-2027 - How to change the battery in the Ford Kuga remote control? Read Answer
    • Kuga 2008-2012 - How do I replace the Ford Kuga remote control battery? Read Answer
    • Kuga 2012-2019 - What to do when the Ford Kuga key does not work? Read Answer
    • Kuga 2020-2027 - Why does the Ford Kuga remote control not work? Read Answer
    • Kuga 2020-2027 - Why is the key not detected in the Ford Kuga? Read Answer
    • Kuga 2008-2012 - Why does the Ford Kuga not recognize the key? Read Answer
    • Kuga 2012-2019 - What to do if the Ford Kuga key does not work? Read Answer
    • Kuga 2012-2019 - Ford Kuga key battery? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos