Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Ford Focus remote control?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Key

In this tutorial we can see how to replace the battery of the Ford Focus remote control, an extremely simple and quick operation. To do this we will need a small flat-tipped screwdriver and a replacement battery of type CR2032. First of all, we locate the slot located on the lower edge of the remote control, near the ring, then we insert the screwdriver inside, lever and separate the two halves. We then remove the old battery, insert the replacement one respecting the polarity and reassemble everything following the reverse procedure.

Posted on 2 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2011-2018 / MK 3) To replace the battery of the Ford Focus remote control, you need to pry with an object like a screwdriver at the bottom of the device: by doing so, …
Ford Focus (2018-2025 / MK 4) In the tutorial in question, we see how to replace the battery of the key remote for a Ford Focus car. First, take the key remote in hand and press t…
Ford Focus (2011-2018 / MK 3) In this short guide, we will see the step-by-step instructions that will allow us to disassemble and replace the battery of the Ford Focus key remote…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos