Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The dual-zone air conditioner of the Ford Edge only works halfway.

Model: Ford Edge MK 2, Cd539 - Years 2015-2024
Part: Air conditioner

In this video we see how to quickly solve the problem of a dual-zone air conditioner, mounted on the Ford Edge, which only works on the passenger side, instead blowing hot air on the driver's side. We will need to turn off the air conditioner while the vehicle is running, (obviously while stopped) then go underneath where the pedals are: here we see among the various wires, also a green switch: we will need to disconnect it, wait a couple of seconds and then reconnect it. If we turn on the air conditioner, now we hear that cold air is blowing from the driver's side as well; the fault is repaired in a very simple way.

Posted on 3 May 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to reset the air conditioner of the Ford Edge
How to reset the air conditioner of the Ford Edge
Ford Edge (2006-2014 / U387, MK 1) In this video, we see how to solve a problem that affects the air conditioner of the Ford Edge, which is a dual-zone automatic air conditioner. It ma…
How to reset the air conditioning on a 2012 Ford Edge
How to reset the air conditioning on a 2012 Ford Edge
Ford Edge (2006-2014 / U387, MK 1) In this guide, we see a 2012 Ford Edge blowing hot air from the air conditioning on the driver's side, while the passenger side blows cold air correc…
Solution for the heating system of a 2013 Ford Edge that is not working
Solution for the heating system of a 2013 Ford Edge that is not working
Ford Edge (2006-2014 / U387, MK 1) In this video we see how to solve the heating problem of a 2013 Ford Edge that is not working: not all the buttons on the Edge are the same type (als…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos