Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel on a Ford Fusion

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Door trim panel

To disassemble the door panel on a Ford Fusion, here are the general steps you can follow. Open the door of your Ford Fusion. Remove any covers or inserts that hide the panel screws. Unscrew all the fixing screws you find, including hidden ones. Carefully detach the panel from the door. You may need to use a plastic tool or a coated screwdriver to avoid damaging the paint or the panel itself. Disconnect the electrical connectors and the handle cable, if present. Remember to proceed with caution to avoid damaging the electrical components or internal mechanisms of the door.

Posted on 5 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Ford Fusion?
How to Remove the Door Panel of the Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) To remove the door panel of the Ford Fusion, loosen the bolts that secure the panel to its housing: these screws are located at the bottom of the pan…
How to Remove the SYNC Module in the Ford Fusion?
How to Remove the SYNC Module in the Ford Fusion?
Ford Fusion North America (2006-2012 / MK 1) In this tutorial, you will see how to remove the SYNC module in the Ford Fusion, useful if you need to replace it. First, go to the rear seat. Then, …
How to remove the cover of the external rearview mirror in the Ford Fusion?
How to remove the cover of the external rearview mirror in the Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) In this tutorial we can see how to disassemble the cover of the external rearview mirror in the Ford Fusion, an extremely simple and quick operation.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos