Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Ford Fusion?

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Door trim panel

To remove the door panel of the Ford Fusion, loosen the bolts that secure the panel to its housing: these screws are located at the bottom of the panel and inside the handle area. Once all these screws are loosened, use a tool to pry off the window switch panel by disconnecting its connectors. This way, the panel can be detached from the door by prying with a tool like a screwdriver; the new panel can then be positioned and secured with the screws removed earlier.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the door panel on a Ford Fusion
How to disassemble the door panel on a Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) To disassemble the door panel on a Ford Fusion, here are the general steps you can follow. Open the door of your Ford Fusion. Remove any covers or in…
Replacing the Power Window Switch on the Ford Fusion
Replacing the Power Window Switch on the Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) This guide will show you how to remove and replace the power window switch on the Ford Fusion, following the instructions below. First, open the fron…
How do you reset the tire pressure warning light on a Ford Fusion?
How do you reset the tire pressure warning light on a Ford Fusion?
Ford Fusion North America (2006-2012 / MK 1) The tire pressure warning light displayed on the instrument panel of the Ford Fusion can be reset by first inflating the tires to the recommended pre…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos