Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre warning light in the Ford C-MAX?

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, you can see how to reset the tyre warning light in the Ford C-MAX. To do this, you will need the scanner shown in the video, which can be easily found online. First, go inside the cabin, then insert the key, press the brake for a second, turn the ignition on and off three times, leaving it on at the end. Press the brake again for a second, turn the ignition off and on three more times, and after hearing the horn beep, activate the scanner near the front left valve.

Repeat this last step for the remaining three tyres, going clockwise.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to Reset the Radio on the Ford C-Max?
How to Reset the Radio on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To reset the radio on the Ford C-Max, open the bonnet to access the fuse box located on the right side. This box must be opened to locate the fuse th…
How to Reset the Tyre Pressure Warning Light on a Ford C-Max?
How to Reset the Tyre Pressure Warning Light on a Ford C-Max?
Ford C Max (2010-2019 / MK 2) To reset the tyre pressure warning light on a Ford C-Max, inflate the car's tyres to the recommended pressure value: this value is written on the sti…
How to Reset the Service Light on the Ford C-Max?
How to Reset the Service Light on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To reset the Service light on the Ford C-Max, turn on the instrument panel by inserting the ignition key into the ignition switch: once the panel is …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos