Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the timing belt of the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Timing belt

In order to replace the timing belt of the Ford Focus, it is necessary to lift the car using a jack or a lift, so that the right front wheel is not in contact with the ground: at this point it will be possible to proceed by completely removing the wheel from the hub and also removing the corresponding fender. This will give access to the side of the engine block where the timing belt is located: by loosening the central nut of the tensioner pulley and removing it from its seat, it will be possible to reduce the tension of the belt, removing it and replacing it with a new one.

Posted on 24 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) To replace the timing belt of the Ford Focus 2.0 TDCi, you need to open the hood and then loosen the screws that hold the corresponding front wheel: …
Ford Focus (2004-2011 / MK 2, Focus 2) This guide provides the main instructions on how to dismantle and replace the timing belt on a Ford Focus 1.6 TDCi. First, raise the vehicle and begi…
Ford Focus (2018-2025 / MK 4) Today we will see the main information that will allow us to dismantle and replace the timing belt of the Ford Focus 1.0 Ecoboost. First of all, we l…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos