Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear light bulbs of the Ford Fiesta 6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light bulb

If one of the rear light bulbs of the Ford Fiesta were to burn out, we will proceed to change it as soon as possible, in order to drive in total safety and avoid penalties. To make the replacement, we open the trunk hood, stand in front of the headlight that contains the bulbs to be replaced, unscrew the two screws along the inner edge, remove the side panel cover and unscrew the 10 mm bolt that secures the headlight, remove the headlight body by overcoming the resistance of the pressure pins, disconnect the connector. Unscrew the four screws that secure the lamp plate and open it, replace the burnt out bulbs. Close the plate and tighten the screws, reassemble the headlight by reversing the operations.

Posted on 24 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulbs on a Ford Fiesta
Replacing the Headlight Bulbs on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) If one or more bulbs in the front headlight of the Ford Fiesta have blown, replace them as soon as possible. Open the bonnet and unscrew the three sc…
Replacement of the low beam headlight bulbs of the Ford Fiesta MKVI.
Replacement of the low beam headlight bulbs of the Ford Fiesta MKVI.
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To change the low beam headlight bulb of the Ford Fiesta MK VI, we open the hood of the engine compartment. For the headlight on the passenger side, …
Replacing the Interior Light Bulbs on the Ford Fiesta
Replacing the Interior Light Bulbs on the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To enhance the interior lights of the Ford Fiesta, replace the standard bulbs with LED lights. Use a plastic lever to pry along the edge of the inter…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos