Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper on the Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Rear bumper

In this tutorial we can see how to remove the rear bumper in the Ford Fiesta, an extremely simple and quick operation. First of all, we open the trunk door, and then, using a flat-tipped screwdriver, we unhook the two plastic covers on the sides of the compartment. We then unscrew the fixing bolts of the lights, separate them from the bodywork, and continue by unscrewing all the bolts on the lower edge and inside the wheel arches. At this point, all that's left to do is to separate the bumper from the frame and install the replacement following the reverse procedure.

Posted on 30 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of a Ford Fiesta
How to Remove the Rear Bumper of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you can start, open the boot of your Ford Fiesta. Begin by unscrewing and removing the fastening bolts located in the rear wheel arches. Next,…
Fitting Rear Bumper on Ford Fiesta
Fitting Rear Bumper on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial video, you will learn how to fit the rear bumper on a Ford Fiesta. First, position the bumper correctly and slot it in place from th…
How to replace the rear bumper of the Ford Fiesta.
How to replace the rear bumper of the Ford Fiesta.
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today we will discover the steps that will allow us to remove and replace the rear bumper of the Ford Fiesta. First, let's open the rear hatch of the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos