Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit Spark Plugs in a Ford Fiesta

Model: Ford Fiesta Fiesta 7, MK 7, MK VII - Years 2017-2023
Part: Spark plugs

Want to replace the spark plugs on your petrol Ford Fiesta? Open the bonnet by pulling the lever and lift it up, securing it in place. Remove the plastic soundproofing panel covering the engine, then detach the coils by hand. Use a socket spanner to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the cylinder head using the socket extension, tighten them, and reconnect the respective power connectors. Finally, refit the soundproofing panel and close the bonnet.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plugs on a Ford Fiesta
How to replace the spark plugs on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, MK 6, Fiesta 6) Before we begin, we will have to go and open the front hood of our Ford Fiesta. So let's start by disconnecting the plugs that are connected to the s…
Replacement spark plugs on Ford Fiesta
Replacement spark plugs on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, MK 6, Fiesta 6) Replacing the spark plugs of a Ford Fiesta. We disassemble the pieces in the engine compartment to get to the spark plugs. We remove the soundproofin…
Ford Fiesta spark plug replacement 1.4
Ford Fiesta spark plug replacement 1.4
Ford Fiesta (2008-2017 / MK VI, MK 6, Fiesta 6) Let's see in this short and simple guide the instructions on how to remove and replace the spark plugs of the Ford Fiesta 1.4 engine. First of all, w…

Other guides you may be interested in

How to Remove the Gear Knob from Citroen Xsara Picasso

The video describes how to remove the gear knob from the Citroen Xsara Picasso. This is a simple task that does not require special skills. First, lower the cover of the gear lever gently to avoid damaging the leather. Once the lever is exposed, pull the gear knob firmly until it comes off. Now the lever is free, and you can fit a new knob. It is important during reassembly that the collar of the lever cover aligns with the knob lock to prevent the cover from shifting.

Watch the video!


by ScegliAuto

More videos