Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Ford Transit van?

Model: Ford Transit MK 7 - Years 2006-2014
Part: Service warning light

In this tutorial, we can see how to reset the service in the Ford Transit van, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. We start by going inside the cabin, then we insert the key and turn on the instrument panel, not the engine. We then press both the accelerator pedal and the brake pedal, keeping them both in position and releasing them when the confirmation message appears on the display. To complete the procedure, simply restart the vehicle.

Posted on 29 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on a Ford Transit Van
How to Reset the Service on a Ford Transit Van
Ford Transit (2006-2014 / MK 7) In this tutorial, you will see how to reset the service on a Ford Transit van, a very simple and quick operation to perform only after completing all…
How to reset the service light on the Ford Transit van?
How to reset the service light on the Ford Transit van?
Ford Transit (2014-2024 / MK 8) In this tutorial we can see how to reset the service on the Ford Transit van, an extremely simple and quick operation, to be carried out only once al…
How to reset the service in the Ford Transit van?
How to reset the service in the Ford Transit van?
Ford Transit (2006-2014 / MK 7) In this tutorial we can see how to reset the service on the Ford Transit van, an extremely simple and fast operation, to be carried out only once all…

Other guides you may be interested in

Removing Ignition Cylinder from Audi A3

In this video, you will see how to replace the ignition cylinder of the Audi A3. First, remove the side plastic cover where the fuses are located: take out the blue 1 Amp fuse. Next, disconnect the battery terminals. Now, connect the cables that run to the steering and remove the central part by pulling it towards you (the airbag). Disconnect the connector by removing it completely. Remove the two screws to take off the plastic cover of the ignition: disconnect the various control units and use a drill to break the seal of the ignition lock to remove it.

Watch the video!


by ScegliAuto

More videos